| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |
|
|
|
|||||||
|
|||||||||
Eur J Cardiothorac Surg 2002;22:244-248
© 2002 Elsevier Science NL
a Clinic for Cardio-vascular Surgery, University Hospital Zürich, Rämistrasse 100, CH-8091 Zurich, Switzerland
b Institute of Anatomy, University Zürich, Winterthurerstrasse 190, CH-8057 Zurich, Switzerland
Received 29 January 2002; received in revised form 16 April 2002; accepted 1 May 2002.
* Corresponding author. Tel.: +41-1-2553679; fax: +41-1-2554446
e-mail: oliver.reuthebuch{at}chi.usz.ch
Objective: Coronary artery surgery with beating heart technique is gaining increasing popularity. However, it is a challenging technique even for well-trained cardiac surgeons. Thus, a training model for beating heart surgery was developed to increase safety and accuracy of this procedure. Methods: The model consists of differentially hardened polyurethane resembling mechanical properties of the human heart. The covering used in this model is a 1:1 replica of the human thoracic wall with optionally embedded skeletal structures. Sternotomy, lateral thoracotomy or trocar placement is possible to access the lungs, the pericardium and the heart with adjacent vessels. Disposable artificial coronaries variable in size, wall quality or wall thickness are embedded in the synthetic myocardium. Two-layer vessels, which can simulate dissection, are available. Bypass conduits utilize the same material. Coronaries/bypasses as well as part of the ascending aorta are water-tight and can be rinsed with saline. Lungs can be inflated. A purpose-built pump induces heart movement with adjustable or randomized stroke volume, heart rate and arrhythmia induction. Results: The model was tested in a recent ‘Wet-Lab’ course attended by 30 surgeons. All conventional instruments and stabilizers with standard techniques can be used. Training with beating or non-beating heart was possible. Time needed for an anastomosis was similar to clinical experience. Each artificial tissue showed its individual nature-like qualities. Various degrees of difficulty can be selected, according to stroke volume, heart rate, arrhythmia, vessel size and vessel quality. The model can be quickly and easily set up and is fully reusable. Conclusions: The similarity to human tissue and the easy set-up make this completely artificial model an ideal teaching tool to increase the confidence of cardiac surgeons dealing with beating heart and minimally invasive surgery.
Key Words: Coronary disease • Surgery • Off-pump • Training model
This article has been cited by other articles:
|
|
 |
|
  T. Watanabe, S. Omata, M. Odamura, M. Okada, Y. Nakamura, and H. Yokoyama Three-dimensional quantification of cardiac surface motion: a newly developed three-dimensional digital motion-capture and reconstruction system for beating heart surgery. J. Thorac. Cardiovasc. Surg., November 1, 2006; 132(5): 1162 - 1171. [Abstract] [Full Text] [PDF]
|
|
|
|
 |
|
 N. Hudorovic Reduction in hospitalisation rates following simultaneous carotid endarterectomy and coronary artery bypass grafting; experience from a single centre Interactive CardioVascular and Thoracic Surgery, August 1, 2006; 5(4): 367 - 372. [Abstract] [Full Text] [PDF]
|
|
|
|
 |
|
 G. J. Murphy, C. A. Rogers, M. Caputo, and G. D. Angelini Acquiring Proficiency in Off-Pump Surgery: Traversing the Learning Curve, Reproducibility, and Quality Control Ann. Thorac. Surg., November 1, 2005; 80(5): 1965 - 1970. [Abstract] [Full Text] [PDF]
|
|
|
|
 |
|
 S. S. Leopold, H. D. Morgan, N. J. Kadel, G. C. Gardner, D. C. Schaad, and F. M. Wolf Impact of Educational Intervention on Confidence and Competence in the Performance of a Simple Surgical Task J. Bone Joint Surg. Am., May 1, 2005; 87(5): 1031 - 1037. [Abstract] [Full Text] [PDF]
|
|
| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |
| ANN THORAC SURG | ASIAN CARDIOVASC THORAC ANN | EUR J CARDIOTHORAC SURG |
| J THORAC CARDIOVASC SURG | ICVTS | ALL CTSNet JOURNALS |
